Waterproofing
Waterproofing
DANOFORCE
DANOFORCE FLEX HP
A highly versatile and flexible fast curing hybrid polymer liquid roofing system. Applied in 2 coats; minimum 2.0-2.5 litres per m2. Requires 2-4% DANOFORCE CATALYST. Colour: Anthracite (Approximate RAL 7015)
DANOFORCE SEALER | ANTHRACITE (APPROX. RAL 7015)
Hard-wearing PMMA-based sealer coat applied onto quartz sand aggregate. Provides a tough, durable finish suitable for heavy foot traffic. Requires 2-4% DANOFORCE CATALYST.
DANOFORCE SEALER | LIGHT GREY (APPROX. RAL 7032)
Hard-wearing PMMA-based sealer coat applied onto quartz sand aggregate. Provides a tough, durable finish suitable for heavy foot traffic. Requires 2-4% DANOFORCE CATALYST.
DANOFORCE SEALER | CUSTOM COLOUR – MINIMUM QUANTITY 18 UNITS
Hard-wearing PMMA-based sealer coat applied onto quartz sand aggregate. Provides a tough, durable finish suitable for heavy foot traffic. Supplied as 8.70L tin of unpigmented sealer plus 1.50kg tin of custom colour pigment. Requires 2-4% DANOFORCE
DANOFORCE CATALYST
Powdered catalyst required for: DANOFORCE PRIMER +LT, DANOFORCE FLEX HP and DANOFORCE SEALER.
DANOFORCE FLEX HP ACCELERATOR
Additive for use with DANOFORCE FLEX HP to accelerate curing times in cold temperatures.
DANOFORCE PRIMER+ LT ACCELERATOR
Additive for use with DANOFORCE PRIMER+ LT to accelerate curing times in cold temperatures. Not compatible with the standard DANOFORCE PRIMER.
GLASSFLEX REINFORCEMENT
450gsm fibreglass matting reinforcement layer for embedment within first layer of DANOFORCE FLEX HP resin.
DANOFORCE DARK SIDE
A highly versatile and flexible fast curing hybrid polymer liquid detailing system for bitumen membrane systems. Applied in a single coat. Requires mineral chippings to be cast into the product before it has fully cured. Supplied with 50g of DANOFOR
DANOFORCE PRIMER+ LT
Low temperature primer for use with DANOFORCE PRIMER+ LT ACCELERATOR in low temperature applications. Requires 2-4% DANOFORCE CATALYST. Not suitable for use on DANOPOL membranes.
DANOFORCE STANDING SEAM PROFILE (PACK OF 10)
30mm high x 15mm wide raised standing seam profile effect.
DANOFORCE METAL PRIMER
Twin-pack epoxy metal primer for use on most metal surfaces (subject to bond test).
DANOFORCE LEAD EFFECT PROFILE (PACK OF 10)
50mm high x 40mm wide raised lead profile effect.