Waterproofing
Waterproofing
Liquid Waterproofing
GLASSFLEX REINFORCEMENT
450gsm fibreglass matting reinforcement layer for embedment within first layer of DANOFORCE FLEX HP resin.
DANOFORCE DARK SIDE
A highly versatile and flexible fast curing hybrid polymer liquid detailing system for bitumen membrane systems. Applied in a single coat. Requires mineral chippings to be cast into the product before it has fully cured. Supplied with 50g of DANOFOR
DANOFORCE PRIMER+ LT
Low temperature primer for use with DANOFORCE PRIMER+ LT ACCELERATOR in low temperature applications. Requires 2-4% DANOFORCE CATALYST. Not suitable for use on DANOPOL membranes.
DANOFORCE STANDING SEAM PROFILE (PACK OF 10)
30mm high x 15mm wide raised standing seam profile effect.
DANOFORCE METAL PRIMER
Twin-pack epoxy metal primer for use on most metal surfaces (subject to bond test).
DANOFORCE LEAD EFFECT PROFILE (PACK OF 10)
50mm high x 40mm wide raised lead profile effect.
DANOFORCE FLEX HP
A highly versatile and flexible fast curing hybrid polymer liquid roofing system. Applied in 2 coats; minimum 2.0-2.5 litres per m2. Requires 2-4% DANOFORCE CATALYST. Colour: Anthracite (Approximate RAL 7015)
DANOFORCE SEALER | ANTHRACITE (APPROX. RAL 7015)
Hard-wearing PMMA-based sealer coat applied onto quartz sand aggregate. Provides a tough, durable finish suitable for heavy foot traffic. Requires 2-4% DANOFORCE CATALYST.
DANOFORCE SEALER | LIGHT GREY (APPROX. RAL 7032)
Hard-wearing PMMA-based sealer coat applied onto quartz sand aggregate. Provides a tough, durable finish suitable for heavy foot traffic. Requires 2-4% DANOFORCE CATALYST.
DANOFORCE SEALER | CUSTOM COLOUR – MINIMUM QUANTITY 18 UNITS
Hard-wearing PMMA-based sealer coat applied onto quartz sand aggregate. Provides a tough, durable finish suitable for heavy foot traffic. Supplied as 8.70L tin of unpigmented sealer plus 1.50kg tin of custom colour pigment. Requires 2-4% DANOFORCE
DANOFORCE CATALYST
Powdered catalyst required for: DANOFORCE PRIMER +LT, DANOFORCE FLEX HP and DANOFORCE SEALER.
DANOFORCE FLEX HP ACCELERATOR
Additive for use with DANOFORCE FLEX HP to accelerate curing times in cold temperatures.
DANOFORCE PRIMER+ LT ACCELERATOR
Additive for use with DANOFORCE PRIMER+ LT to accelerate curing times in cold temperatures. Not compatible with the standard DANOFORCE PRIMER.
