ESTERDAN EQUERRE 25 ELAST

Flashing membrane.

Product variations:

ETE 06/0062

Datasheet

Declaration of Performance (DoP)

Description Technical features and measures Related documentation

ESTERDAN EQUERRE 25 ELAST. is a waterproofing bituminous sheet with non self-protected surface of 4.0 kg/m². Composed of a non-woven polyester felt reinforcement and covered on both sides with SBS modified bitumen mastic. A polyethylene film is used as anti-adherent material on both sides. Tested according to standard EN test methods.

Maintenance Recommendations

Please refer to DANOSA UK Technical Statement ‘Flat Roof Waterproofing – Cleaning and Maintenance Recommendations’

Handling, storage and preservation

Before moving the pallet, check the condition of the shrink-wrap and reinforce if necessary.
In order to guarantee adequate product quality, it must be stored in level, dry, clean places free of sharp and pointed objects. In any case, special protection from direct sunlight should be ensured by means of a roof or tarpaulin.
The product must be stored in a dry place protected from rain, sun, heat and low temperatures.
The product must be stored in an upright position.
This product is not toxic or flammable.
Pallets shall not be stacked on top of each other.
For high storage, the racks must have three cross members, or braces under the wooden pallet skids.
For handling with a crane, use a protective net as indicated on the pallet label.
Membranes will be used on a FIFO basis (First In First Out).
Membranes should be taken to the roof as required for use.
In all cases, the Occupational Safety and Hygiene standards, as well as the standards of good construction practice, must be taken into account.

Notice

The information contained in this document and any other advice provided, are given in good faith, based on DANOSA's current knowledge and experience when products are properly stored, handled and applied, in normal situations and in accordance with the recommendations of DANOSA. The information applies only to the application (s) and the product (s) to which reference is expressly made. In case of changes in the parameters of the application, or in case of a different application, consult the DANOSA Technical Service before using the DANOSA products. The information contained herein does not exonerate the responsibility of the building agents to test the products for the application and intended use, as well as their correct application in accordance with current legal regulations. The product images used in our communications are indicative and may differ slightly in color and aesthetic appearance in relation to the final product.Orders are accepted in accordance with the terms of our current General Sales Conditions.DANOSA reserves the right to modify, without prior notice, the data reflected in this documentation.Website: www.danosa.com E-mail: info@danosa.com Telephone: +34 949 88 82 10

Presentation

Length (cm): 1000
Width (cm): 25
Surface (m²): 2.5
Product code: 202015

Technical Data

Concept	Value	Standard
Mass per unit area (nominal) (kg/m²)	4	-
Hazardous substances	PND	-

Standards and Certification

In accordance with the UNE-EN 13707 standard ‘Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics’.
In accordance with the UNE-EN 13969 standard for ‘Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics’.
Complies with CE marking requirements.