ALU EXTRA 40 V3
Waterproofing sheet of polymer modified bitumen with metallic self-protection.
Product variations:
ALU EXTRA 40 V3 - 30 KG (10X1) is a bituminous waterproofing sheet with metallic self-protection,
LBM-30/M-NA (APP -5 ºC) type.
Composed of an polymer modified bitumen (pliability -5ºC) mastic, uses on the upper side of the sheet embossed aluminium foil in aluminium colour as protective material. The anti-adhesive material used on the lower side is polyethylene film. It does not carry internal reinforcement.
Tested according to standard EN test methods.
Maintenance Recommendations
- Please refer to DANOSA UK Technical Statement ‘Flat Roof Waterproofing – Cleaning and Maintenance Recommendations’
Handling, storage and preservation
- Before moving the pallet, check the condition of the shrink-wrap and reinforce if necessary.
- For high storage, the racks must have three cross members, or braces under the wooden pallet skids.
- For handling with a crane, use a protective net.
Notice
- The information contained in this document and any other advice provided, are given in good faith, based on DANOSA's current knowledge and experience when products are properly stored, handled and applied, in normal situations and in accordance with the recommendations of DANOSA. The information applies only to the application (s) and the product (s) to which reference is expressly made. In case of changes in the parameters of the application, or in case of a different application, consult the DANOSA Technical Service before using the DANOSA products. The information contained herein does not exonerate the responsibility of the building agents to test the products for the application and intended use, as well as their correct application in accordance with current legal regulations. The product images used in our communications are indicative and may differ slightly in color and aesthetic appearance in relation to the final product.Orders are accepted in accordance with the terms of our current General Sales Conditions.DANOSA reserves the right to modify, without prior notice, the data reflected in this documentation.Website: www.danosa.com E-mail: info@danosa.com Telephone: +34 949 88 82 10
Presentation
- Length (cm): 1000
- Width (cm): 100
- Thickness (mm): 2.5
- Product code: 151015
Technical Data
| Concept | Value | Standard |
|---|---|---|
| Mass per unit area (nominal) (kg/m²) | 3 | - |
| External fire behaviour | Broof(t1) | UNE-EN 1187; UNE-EN 13501-5 |
| Elongation at break longitudinal (%) | PND | UNE-EN 12311-1 |
| Elongation at transverse break (%) | PND | UNE-EN 12311-1 |
| Watertightness at 10 kPa (Type A) | Pasa | UNE-EN 1928 |
| Water vapour resistance factor (μ) | 20.000 | UNE-EN 1931 |
| Low temperature flexibility (ºC) | < -5 | UNE-EN 1109 |
| Reaction to fire | E | UNE-EN 11925-2; UNE-EN 13501-1 |
| Resistance to static loading (kg) | PND | UNE-EN 12730 |
| Resistance to root penetration | No Pasa | UNE-EN 13948 |
| Longitudinal tensile strength (N / 5cm) | 400 ± 200 | UNE-EN 12311-1 |
| Transverse tensile strength (N / 5cm) | 400 ± 200 | UNE-EN 12311-1 |
| Longitudinal resistance to tearing (nail shank) (N) | PND | UNE-EN 12310-1 |
| Transversal resistance to tearing (nail shank) (N) | PND | UNE-EN 12310-1 |
| Resistance to impact, A (mm) | PND | UNE-EN 12691 |
| Joint Strength: Welding Shear | PND | UNE-EN 12317-1 |
| Hazardous substances | PND | - |
Addtitional Technical Data
| Concept | Value | Standard |
|---|---|---|
| Adhesion of granules (%) | PND | UNE-EN 12039 |
| Dimensional stability at elevated temperatures (longitudinal) (%) | PND | UNE-EN 1107-1 |
| Dimensional stability at high temperatures (transversal) (%) | PND | UNE-EN 1107-1 |
| Creep resistance at high temperatures (ºC) | >100 | UN-EN 1110 |
Standards and Certification
- In accordance with the UNE-EN 13707 standard ‘Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics’.
- Complies with CE marking requirements.
Downloads
Agenda cita con un técnico de Danosa
