Danosa > Danosa Global > Products > MATBAND WALL.

MATBAND WALL

Acoustic insulation profiled strip for decoupling vertical elements.

Product variations:
Acoustic Insulation
Datasheet
Share
MATBAND WALL is a profiled recycled rubber strip designed to decouple vertical building elements, creating a resilient connection with floor slabs, screeds or columns and helping to limit structure-borne transmisson at junctions.

Scope

  • Resilient decoupling between partitions or masonry walls and floor slabs, screeds or structural elements.
  • Installation beneath the base of vertical walls to reduce rigid contact with the supporting structure.
  • Treatment of junctions between masonry walls, columns and other structural elements, provided that continuity of the strip is ensured.
  • Suitable for homes, hotels, offices, commercial premises and other buildings where structure-borne sound transmission needs to be limited.
  • Integration into acoustic insulation systems requiring continuity between the decoupling of the floating floor and vertical elements.

Advantages & Benefits

  • Balance between thickness and decoupling potential.
  • Profiled geometry designed to reduce dynamic stiffness.
  • Creates a resilient connection between the vertical element and the substrate, preventing direct rigid contact.
  • Helps reduce flanking structure-borne transmission through floor slabs, screeds and columns, a purpose also identified for the reference wall-decoupling product.
  • Its profiled geometry provides a resilient layer and promotes decoupling between building elements.

Instruction for Use


  • Once the partition layout has been marked out, MATBAND WALL is laid along the marked line.
  • The brick partition is then built on top of the strip in accordance wiith the proposed system.


    • Indications and Important Recommendations

    • To prevent it from moving, it can be held in place with a thin layer of bonding mortar.
    • Do not puncture the sheet or allow mortar residues to create acoustic bridges.
    • The values indicated correspond to the results available at the current stage of product development and may be updated as the industrialisation and validation process progresses.

    Handling, storage and preservation

    • Store in a dry place, protected from the weather, heat sources and direct sunlight.
    • Keep the product in its original packaging until use.
    • Avoid deformations, impacts or pressure points that could alter the profiled geometry.

    Notice

    • The information contained in this document and any other advice provided, are given in good faith, based on DANOSA's current knowledge and experience when products are properly stored, handled and applied, in normal situations and in accordance with the recommendations of DANOSA. The information applies only to the application (s) and the product (s) to which reference is expressly made. In case of changes in the parameters of the application, or in case of a different application, consult the DANOSA Technical Service before using the DANOSA products. The information contained herein does not exonerate the responsibility of the building agents to test the products for the application and intended use, as well as their correct application in accordance with current legal regulations. The product images used in our communications are indicative and may differ slightly in color and aesthetic appearance in relation to the final product.Orders are accepted in accordance with the terms of our current General Sales Conditions.DANOSA reserves the right to modify, without prior notice, the data reflected in this documentation.Website: www.danosa.com E-mail: info@danosa.com Telephone: +34 949 88 82 10

    Presentation

    • Length (cm): 1250
    • Width (cm): 15
    • Thickness (mm): 10/5
    • Product code: 610118
    MATBAND WALL.
    MATBAND WALL.

    Technical Data

    Concept Value Standard
    Mass per unit area (nominal) (kg/m²) ≥ 5.60 ISO 845
    Densidad (kg/m³) ≥ 550 EN ISO 29470:2020
    Thermal conductivity declared (W/mK) ≥ 0.10 EN 12667
    Compression strength (kPa) ≥ 100 EN 826
    Creep (% H/dec) 0.22 (0.02 mPa) EN 1606
    Reaction to fire E EN 13501-1
    Tensile strength (kPa) ≥ 350 ISO 37
    Thermal Resistance (m²K/W) ≥ 0.10 EN 12667
    Dynamic stiffness (MN/m³) ≥ 15 EN 29052-1
    Break Elongation (%) ≥ 40 ISO 37
    Work temperature (ºC) -30 / 80 EN 13501-1