Danosa > Danosa Global > Products > ARGOCOLA ELITE 100

ARGOCOLA ELITE 100

High performance cementitious adhesive C1T

Mortars

Colors:

Grey 5Kg - 350179 25Kg - 350005
White 25Kg - 350004
ARGOCOLA ELITE 100 is a high performance C1T cementitious adhesive formulated with Portland cement, selected aggregates, organic additives and polymers that give it extraordinary workability and adhesion.

Installation video

custom-preview

Advantages & Benefits

  • High mechanical performance.
  • Long shelf-life, even after opening.
  • Great plasticity.
  • Allows for rectification of pieces.
  • Without off-hook.

Descriptive Memory

Ceramic tiles shall be laid with ARGOCOLA® ELITE 100 cementitious adhesive, from the company DANOSA, class C1T according to the UNE EN 12004 standard. The fixing substrate must be sound, clean, free of friable parts, completely hardened and have completed its time of dimensional variation. The joints shall be respected. Ceramic tiles shall be laid with spacers for tile-to-tile joints in accordance with UNE 1308002.

Instruction for Use

  • Mix ARGOCOLA® ELITE 100 with 6.5 L of clean water per 25 kg bag manually or mechanically until a homogeneous, creamy and lump-free mixture is obtained.
  • Allow to stand for 5 minutes before application.
  • Comb the adhesive onto the substrate with a 6×6 mm notched trowel for small formats or 8×8 mm for formats larger than 40×40 cm. The adhesive is spread out in layers of approx. 1 m² so that the time that elapses between the application of the adhesive on the substrate and the laying of the tiles does not cause the adhesive to lose sufficient wettability for proper adhesion.
  • The tile should be pressed until the grooves of the adhesive are flattened.

Presentation

  • Weight (kg): 5
  • Performance in mm thickness (kg/m²): 1,8
  • Appearance: Powder
  • Colour: Grey
  • Product code: 350179
ARGOCOLA ELITE 100

Technical Data

Concept Value Standard
Mass per unit area (nominal) (kg/m²) 5 -
Capillary Absorption (kg/m²h0.5) W1 -
Adhesion after heat (N/mm²) ≥ 0,5 -
Initial adhesion (N/mm²) ≥ 0,5 -
Adhesion after freeze-thaw cycles (N/mm²) ≥ 0,5 -
Adhesion after immersion in water (N/mm²) ≥ 0,5 -
Adhesion after open time 30 min (N/mm²) ≥ 0,5 -
Mixing water (%) 24/26 -
Classification according to UNE EN 12004 C1T -
Bulk density (kg/L)v ~ Value 1,60 ± 0,05 -
Fresh mass density (kg/L) ~ Value 1,80 ± 0,05 -
Slipping (mm) ≤ 0,5 -
Grain size range (mm) ~ value 0/0,8 -
Water vapour permeability (µ) Clase I -
Reaction to fire A1 -
Hazardous substances Ver HS -

Downloads