ACOUSTIC INSULATION FIXINGS
Fixings for our sound insuation materials.
Fixing composed of an expansion nail made of Polypropylene Copolymer and a spike made of high impact resistant Polystyrene.
Installation video
Instruction for Use
Previous operations:
- If it is applied on ceramic elements, the rules of good acoustic execution must be taken into account, i.e. once the partition is built, it is regularised and sealed by plastering with plaster or mortar at least 8 mm thick and left to cure.
- Firstly, a hole is drilled with a diameter slightly smaller than the expanding dowel of the nail. A hammer drill with a diamond drill bit is used to drill through both the panel and the partition.
- The nail is then driven in flush with the insulation board.
- The dowel is then driven in.
- Finally, the dowel is hammered into the material.
Agenda cita con un técnico de Danosa
