Danosa > Danosa Global > Products > ALU EXTRA 40 V3

ALU EXTRA 40 V3

Waterproofing sheet of polymer modified bitumen with metallic self-protection.

Product variations:
Waterproofing
ALU EXTRA 40 V3 - 30 KG (10X1) is a bituminous waterproofing sheet with metallic self-protection, LBM-30/M-NA (APP -5 ºC) type. Composed of an polymer modified bitumen (pliability -5ºC) mastic, uses on the upper side of the sheet embossed aluminium foil in aluminium colour as protective material. The anti-adhesive material used on the lower side is polyethylene film. It does not carry internal reinforcement. Tested according to standard EN test methods.

Maintenance Recommendations

  • Please refer to DANOSA UK Technical Statement ‘Flat Roof Waterproofing – Cleaning and Maintenance Recommendations’

Handling, storage and preservation

  • Before moving the pallet, check the condition of the shrink-wrap and reinforce if necessary.
  • For high storage, the racks must have three cross members, or braces under the wooden pallet skids.
  • For handling with a crane, use a protective net.

Notice

  • The information contained in this document and any other advice provided, are given in good faith, based on DANOSA's current knowledge and experience when products are properly stored, handled and applied, in normal situations and in accordance with the recommendations of DANOSA. The information applies only to the application (s) and the product (s) to which reference is expressly made. In case of changes in the parameters of the application, or in case of a different application, consult the DANOSA Technical Service before using the DANOSA products. The information contained herein does not exonerate the responsibility of the building agents to test the products for the application and intended use, as well as their correct application in accordance with current legal regulations. The product images used in our communications are indicative and may differ slightly in color and aesthetic appearance in relation to the final product.Orders are accepted in accordance with the terms of our current General Sales Conditions.DANOSA reserves the right to modify, without prior notice, the data reflected in this documentation.Website: www.danosa.com E-mail: info@danosa.com Telephone: +34 949 88 82 10

Presentation

  • Length (cm): 1000
  • Width (cm): 100
  • Thickness (mm): 2.5
  • Product code: 151015
ALU EXTRA 40 V3

Technical Data

Concept Value Standard
Mass per unit area (nominal) (kg/m²) 3 -
External fire behaviour Broof(t1) UNE-EN 1187; UNE-EN 13501-5
Elongation at break longitudinal (%) PND UNE-EN 12311-1
Elongation at transverse break (%) PND UNE-EN 12311-1
Watertightness at 10 kPa (Type A) Pasa UNE-EN 1928
Water vapour resistance factor (μ) 20.000 UNE-EN 1931
Low temperature flexibility (ºC) < -5 UNE-EN 1109
Reaction to fire E UNE-EN 11925-2; UNE-EN 13501-1
Resistance to static loading (kg) PND UNE-EN 12730
Resistance to root penetration No Pasa UNE-EN 13948
Longitudinal tensile strength (N / 5cm) 400 ± 200 UNE-EN 12311-1
Transverse tensile strength (N / 5cm) 400 ± 200 UNE-EN 12311-1
Longitudinal resistance to tearing (nail shank) (N) PND UNE-EN 12310-1
Transversal resistance to tearing (nail shank) (N) PND UNE-EN 12310-1
Resistance to impact, A (mm) PND UNE-EN 12691
Joint Strength: Welding Shear PND UNE-EN 12317-1
Hazardous substances PND -

Addtitional Technical Data

Concept Value Standard
Adhesion of granules (%) PND UNE-EN 12039
Dimensional stability at elevated temperatures (longitudinal) (%) PND UNE-EN 1107-1
Dimensional stability at high temperatures (transversal) (%) PND UNE-EN 1107-1
Creep resistance at high temperatures (ºC) >100 UN-EN 1110

Standards and Certification

  • In accordance with the UNE-EN 13707 standard ‘Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics’.
  • Complies with CE marking requirements.

Downloads