Danosa > Danosa Global > Products > REVESTIDAN WATER STOP

REVESTIDAN WATER STOP

Elastic coat for waterproofing roofs weather resistant

Waterproofing

Colors:

Grey 20Kg - 724011 5Kg - 724012
Red 20Kg - 724013 5Kg - 724014
White 20Kg - 724009 5Kg - 724010
Single-component water-based acrylic waterproofing coating with high elasticity and flexibility, with excellent water and liquid tightness in general. Strong tensile strength and elongation at break. Extraordinary resistance to ageing, abrasion and perforation. Good homogenisation of the product and easy application. Weather and UV resistant film. Excellent abrasion resistance. Good crack filling and resistant to micro-cracking. Increased mechanical strength with the use of glass fibre mesh. High elasticity and flexibility. Excellent durability. Suitable for preventing water seepage on terraces, roof terraces, roofs, expansion joints, downpipes, etc. In the repair of areas with existing cracks or with a tendency to form.

Scope

  • Treatment of small joints and fissures.
  • Suitable for preventing water seepage on terraces, roof terraces, roofs, expansion joints, downpipes, etc.

Advantages & Benefits

  • Waterproof to rain water.
  • Excellent watertightness to water and liquids in general.
  • Strong tensile strength and elongation at break.
  • Good homogenisation of the product and easy application.
  • Weather and UV resistant film.
  • Good abrasion resistance.
  • Good crack filling and resistant to micro-cracking.

Substrate preparation

  • Surfaces to be waterproofed must be dry and free of dust, dirt, moss, efflorescence, saltpetre, grease, etc. Remove dust, grease and other contaminants. Apply the waterproofing coating according to the instructions for use. For old surfaces, remove possible mould contamination with bleach or other suitable products, as well as loose parts of paint or other building materials. Treat efflorescence or saltpetre with dilute acid solution, rinse and allow to dry. It may be advisable to treat the surface with a water-based product suitable for removing and retaining the appearance of efflorescence caused by saltpetre. On substrates in poor condition, with lack of cohesion or with moisture problems, apply a coat of DANOPRIMER® W. If there are cracks or crevices larger than 1 mm, they should preferably be repaired with mortar, or with a mixture of 1 part REVISTIDAN® ONE #1 and 4 parts dry sand. Smooth and level any slopes or unevenness of the surface to be painted, to avoid possible puddling. Apply the paint according to the instructions for use.

Instruction for Use

Before applying the product on the substrate, make sure it is dry and clean of solid remains and irregularities. Do not apply at temperatures below 5°C or above 30°C, or when there is a risk of rain within 48 hours. Apply by roller. First repair cracks and apply DANOBAND® Butyl, Elastidan PU 40 in the corners. Stir until perfectly homogenised. Dilute the first coat 5-10 % with water. Apply the second and subsequent coats undiluted, crosswise to the direction of the previous coat. The application can be done by brush, roller or spray, after shaking the product and dilution. The tools must be cleaned with water before the paint dries.

Warning

  • Clean tools with water right after finishing. If there is solid dirt, we recommend scraping it off.
  • Do not use on continuously flooded surfaces, swimming pools and tanks.
  • Do not apply in direct sun, rain, frost, wet substrate or with relative humidity greater than 85%.
  • Do not apply at temperatures below 5 °C.
  • Do not apply if rain or frost is expected.

Handling, storage and preservation

  • Store in a cool, dry place.
  • Storage stability in closed original container and keep the product between 5 °C and 30 °C for a maximum period of 24 months.

Notice

  • The information contained in this document and any other advice provided, are given in good faith, based on DANOSA's current knowledge and experience when products are properly stored, handled and applied, in normal situations and in accordance with the recommendations of DANOSA. The information applies only to the application (s) and the product (s) to which reference is expressly made. In case of changes in the parameters of the application, or in case of a different application, consult the DANOSA Technical Service before using the DANOSA products. The information contained herein does not exonerate the responsibility of the building agents to test the products for the application and intended use, as well as their correct application in accordance with current legal regulations. The product images used in our communications are indicative and may differ slightly in color and aesthetic appearance in relation to the final product.Orders are accepted in accordance with the terms of our current General Sales Conditions.DANOSA reserves the right to modify, without prior notice, the data reflected in this documentation.Website: www.danosa.com E-mail: info@danosa.com Telephone: +34 949 88 82 10

Presentation

  • Colour: Grey
  • Weight (kg): 20
  • Product code: 724011
REVESTIDAN WATER STOP

Technical Data

Concept Value Standard
Elongation (%) >300 -
Fixed matter in weight (%) 61 ± 0.5 -
Reaction to fire M1 -
Tensile strength (N/mm²) >1 -
Drying time to touch (hours) 2 -
Drying time between coats (hours) 8 -
Specific gravity (kg/L) 1,25 -
Loss of elongation due to accelerated ageing (%) <40 -
Loss of elongation due to thermal ageing (%) <35 -
Loss of mass due to thermal ageing (%) <10 -

Addtitional Technical Data

Concept Value Standard
Viscosity at 22ºC (Pa.s) 80 ± 10 -

Downloads