Danosa > Danosa Global > Products > DANOPOL HS 1.5 COOL ROOFING

DANOPOL HS 1.5 COOL ROOFING

Single Ply PVC-p 1.5 mm membrane. Mechanically Fixed.

Product variations:
Waterproofing
BBA 14/5118 (1) BBA 14/5118 (1)
EPD S-P-00691 EPD S-P-00691
ETE 10/0054 ETE 10/0054
FM Approvals PR455736 RR242640 FM Approvals PR455736 RR242640
DANOPOL HS 1.5 COOL ROOFING is a synthetic PVC plasticized membrane, Reinforced with polyester net carrier. Designed for flat roof waterproofing, U.V. resistant.

Presentation

  • Length (cm): 1500
  • Length measurement standard: EN 1848-2
  • Width (cm): 180
  • Width measurement standard: EN 1848-2
  • Thickness (mm): 1.5
  • Colour: White
  • Product code: 210053
DANOPOL HS 1.5 COOL ROOFING

Technical Data

Concept Value Standard
Mass per unit area (nominal) (kg/m²) 1.9 -
Longitudinal elongation at break (%) > 100 -
Transversal elongation at break (%) > 110 -
External fire behaviour Broof (t1) - Broof (t3) - Broof (t4) EN 13501-5
Longitudinal & transversal dimensional stability < 0.3 EN 1107-2
Water vapour permeability (µ) 47.000 ± 30% EN 1931
Flexibility at low temperature (ºC) < -30 EN 495-5
Reaction to fire E EN 13501-1
Resistance to static loading (kg) > 55 -
Resistance to static loading; method B (hard support) (kg) > 55 EN 12730 Método B
Resistance to root penetration Pasa EN 13948
Longitudinal & transversal tensile strength (N/5cm) > 1100 / 1000 EN 12311-2 Método A
Longitudinal resistance to tearing (nail shank) (N) > 250 EN 12310-2
Transversal resistance to tearing (nail shank) (N) > 250 EN 12310-2
Resistance to impact, A (mm) > 700 EN 12691
Overlaps resistance (Shear of overlaps) (N/50mm) > 950 EN 12317-2
Overlaps resistance (Peeling of overlap) (N/50mm) > 250 EN 12316-2
Hazardous substances PND -

Addtitional Technical Data

Nominal minimum thickness 1.5 (-5%; +10%) EN 1849-2 Mass (kg/m²) 1.9 (-5%; +10%) EN 1849-2 Loss of elongation at break (UV 5000 h) < 10< 10 EN 1297, EN 12311-2EN 1297, EN 12311-2 Loss of plasticizers (mass change at 30 days) (%) < 4.5 EN ISO 177 Flatness (mm) < 10 EN 1848-2 Nominal minimum thickness 1.5 (-5%; +10%) EN 1849-2 Mass (kg/m²) 1.9 (-5%; +10%) EN 1849-2 Loss of elongation at break (UV 5000 h) < 10< 10 EN 1297, EN 12311-2EN 1297, EN 12311-2 Loss of plasticizers (mass change at 30 days) (%) < 4.5 EN ISO 177 Flatness (mm) < 10 EN 1848-2 Straightness (mm) < 50 EN 1848-2 Resistance to static punching (N) > 1200 UNE 104416 (b)

Environmental Information

Concept Value Standard
Post-consumer recycled content (%) NDP -
Pre-Consumer recycled content (%) NDP -
Solar reflectance index (SRI) 103 ASTM E1980-11
Manufactured in Fontanar - Guadalajara (España) -

Downloads