Danosa > Danosa Global > Products > MATIMPACT 15/7.

MATIMPACT 15/7

Profiled acoustic membrane for impact sound insulation in floors and floating screeds.

Product variations:
Acoustic Insulation
Datasheet
Share
MATIMPACT 15/7 is a profiled recycled rubber membrane designed for impact sound insulation in high performance floors beneath mortar, screed or floating slabs. Its greater nominal thickness positions it as the premium option within the MATIMPACT product range.

Scope

  • Gyms, activity rooms ands noisy facilities.
  • Floating floors with high acoustic performance requirements.
  • Projects with sufficent headroom and a need for greater potential decoupling.

Advantages & Benefits

  • Greater nominal thickness within the profiled range.
  • Profiled geometry designed to reduce dynamic stiffness.
  • Premium position for high requirement floors.

Instruction for Use


  • Prepare the substrate: clenad and lever the surface, removing debris and any elements that could damage the product.
  • Lay MATIMPACT: butt the sheets together without gaps or overlaps, carefully fitting them all junctions.
  • Isolate the perimeter: install DESOLIDARIZADOR PERIMETRAL along walls, columns and all over vertical junctions, extending above the height of the screed and final finish.
  • Install a separation film before pouring the screed to prevent leakage and acoustic bridges, with a 15 cm overlap.
    *If this separation layer is nos instaled, all MATIMPACT membrane joints must be sealed with masking tape.
  • Install the screed or floating slab without displacing or puncturing the film or membrane, respecting the thickness, reinforcement and curing specified for the system.


    • Indications and Important Recommendations

    • Avoid any rigid contact between the floating screed and walls, columns, service installations or vertical elements.
    • Treat the perimeter with a compatible resilient strip and ensure continuity of the elastic layer.
    • Do not puncture the sheet or allow mortar residues to create acoustic bridges.
    • Specify the screed thickness, reinforcement and strength according to the expected loads.
    • Do not use directly beneath the final floor finish unless specifically approved for use as an underlay.
    • The values indicated correspond to the results available at the current stage of product development and may be updated as the industrialisation and validation process progresses.

    Handling, storage and preservation

    • Store in a dry place, protected from the weather, heat sources and direct sunlight.
    • Keep the product in its original packaging until use.
    • Avoid deformations, impacts or pressure points that could alter the profiled geometry.

    Notice

    • The information contained in this document and any other advice provided, are given in good faith, based on DANOSA's current knowledge and experience when products are properly stored, handled and applied, in normal situations and in accordance with the recommendations of DANOSA. The information applies only to the application (s) and the product (s) to which reference is expressly made. In case of changes in the parameters of the application, or in case of a different application, consult the DANOSA Technical Service before using the DANOSA products. The information contained herein does not exonerate the responsibility of the building agents to test the products for the application and intended use, as well as their correct application in accordance with current legal regulations. The product images used in our communications are indicative and may differ slightly in color and aesthetic appearance in relation to the final product.Orders are accepted in accordance with the terms of our current General Sales Conditions.DANOSA reserves the right to modify, without prior notice, the data reflected in this documentation.Website: www.danosa.com E-mail: info@danosa.com Telephone: +34 949 88 82 10

    Presentation

    • Length (cm): 600
    • Width (cm): 120
    • Thickness (mm): 15/7
    • Product code: 610117
    MATIMPACT 15/7.
    MATIMPACT 15/7.

    Technical Data

    Concept Value Standard
    Mass per unit area (nominal) (kg/m²) ≥ 8.65 ISO 845
    Densidad (kg/m³) ≥ 550 EN ISO 29470:2020
    Thermal conductivity declared (W/mK) ≥ 0,10 EN 12667
    Compression strength (kPa) ≥ 100 EN 826
    Creep (% H/dec) 0.22 (0.02 mPa) EN 1606
    Reaction to fire E EN 13501-1
    Tensile strength (kPa) ≥ 350 ISO 37
    Thermal Resistance (m²K/W) ≥ 0.15 EN 12667
    Dynamic stiffness (MN/m³) ≥ 13 EN 29052-1
    Break Elongation (%) ≥ 40 ISO 37
    Work temperature (ºC) -30 / 80 -

    Addtitional Technical Data

    Acoustic Performance:
    ConceptValueStandard
    ΔLw result (dB)31-33EN ISO 717-2
    Reference configuration140 mm reinforced concrete slab + MATIMPACT 15/7 + separation film + >50 mm screedSystem SUF1 · System SUF2