ESTERDAN 30 P ELAST SEMIADHESIVE
Tough 3kg/m² SBS elastomeric venting underlay. Semi-adhesive.
Product variations:
BBA 10/4787 (PS1)
Bituminous SBS modified membrane reinforced with a non-woven polyester felt.
Combined underlay and venting membrane for partial-bond applications finished with easy peel polyethylene film finish.
Indications and Important Recommendations
- Exposure to the sun can make it difficult to remove the release film. The temperature of the membraneduring installation must not exceed 45°C.
- It must not be installed when the ambient, product or substrate temperature is below +10°C.
- Not suitable as cap sheet on green roofs; use GARDEN variant.
Maintenance Recommendations
- Please refer to DANOSA UK Technical Statement ‘Flat Roof Waterproofing – Cleaning and Maintenance Recommendations’.
Handling, storage and preservation
- Before moving the pallet, check the condition of the shrink-wrap and reinforce if necessary.
- The product should be kept in the sun for the shortest time possible to protect it from UV rays
- The product must be stored in a dry place protected from rain, sun, heat and low temperatures.
- The product must be stored horizontally.
- This product should not be installed when the ambient, product or support temperature is below +10ºC.
- Pallets shall not be stacked on top of each other.
Presentation
- Length (cm): 700
- Width (cm): 100
- Thickness (mm): 2.5
- Surface (m²): 7
- Product code: 142029
Technical Data
| Concept | Value | Standard |
|---|---|---|
| Durability flexibility | -5 ± 5 | - |
| Creep durability (ºC) | 100 ±10 | UN-EN 1110 |
| Elongation at break longitudinal (%) | 45 ±15 | UNE-EN 12311-1 |
| Elongation at transverse break (%) | 45 ±15 | UNE-EN 12311-1 |
| Watertightness at 10 kPa (Type A) | Pasa | UNE-EN 1928 |
| Water vapour resistance factor (μ) | 20.000 | UNE-EN 1931 |
| Low temperature flexibility (ºC) | <-15 | UNE-EN 1109 |
| Resistance to static loading (kg) | >15 | UNE-EN 12730 |
| Resistance to root penetration | No Pasa | UNE-EN 13948 |
| Longitudinal tensile strength (N / 5cm) | 700 ± 200 | UNE-EN 12311-1 |
| Transverse tensile strength (N / 5cm) | 450 ± 150 | UNE-EN 12311-1 |
| Longitudinal resistance to tearing (nail shank) (N) | NPD | UNE-EN 12310-1 |
| Transversal resistance to tearing (nail shank) (N) | NPD | UNE-EN 12310-1 |
| Resistance to impact, A (mm) | >900 | UNE-EN 12691 |
| Joint Strength: Welding Shear | 450 ±150 | UNE-EN 12317-1 |
Addtitional Technical Data
| Concept | Value | Standard |
|---|---|---|
| Adhesion of granules (%) | NPD | UNE-EN 12039 |
| Dimensional stability at elevated temperatures (longitudinal) (%) | <0.3 | UNE-EN 1107-1 |
| Dimensional stability at high temperatures (transversal) (%) | <0.3 | UNE-EN 1107-1 |
| Creep resistance at high temperatures (ºC) | >100 | UN-EN 1110 |
Environmental Information
| Concept | Value | Standard |
|---|---|---|
| Post-consumer recycled content (%) | 35 | - |
| Manufactured in | Fontanar - Guadalajara (España) | - |