Watertightness

Waterproofing

Liquid Waterproofing

REVESTIDAN PROOF S

Colourless resin to moisture-proof and protect porous façades. Solvent base

REVESTIDAN FIBER

Elastic coating with fibres for re-waterproofing roofs. Water based

REVESTIDAN INDOOR

Elastic membrane for waterproofing windowsills, balconies, parapets, bathrooms, kitchens and interior wet areas.

REVESTIDAN REIMPER

Waterproofing liquid membrane, in aqueous dispersion, with hybrid acrylic/polyurethane technology which, once dry, forms an elastic, impervious, UV resistant film. Versatile product, fit for waterproofing and protection, ultrarreflective white coat to imp

REVESTIDAN PROOF REPELL

Colourless resin to protect façades and porous pavements. ANTI-GRAFFITIS / ANTI-STAINS

DANOPUR HT

Liquid membrane for waterproofing and protection of roofs and buried structures

DANOCLEAN ANTIFUNGI

Concentrated cleaning solution for moss, fungi and lichens on several structures such as roofs, terraces and façades.

DANOMIX LATEX

Latex resin additive to improve mechanical properties, bonding and reduce wáter absorption

DANOFORCE CATALYST

Powdered catalyst required for: DANOFORCE PRIMER +LT, DANOFORCE FLEX HP and DANOFORCE SEALER.

DANOFORCE FLEX HP ACCELERATOR

Additive for use with DANOFORCE FLEX HP to accelerate curing times in cold temperatures.

DANOFORCE PRIMER+ LT ACCELERATOR

Additive for use with DANOFORCE PRIMER+ LT to accelerate curing times in cold temperatures. Not compatible with the standard DANOFORCE PRIMER.

GLASSFLEX REINFORCEMENT

450gsm fibreglass matting reinforcement layer for embedment within first layer of DANOFORCE FLEX HP resin.

ACETONE CLEANER

Chemical general purpose cleaning and preparation solution for use with DANOFORCE systems.

DANOFORCE DARK SIDE

A highly versatile and flexible fast curing hybrid polymer liquid detailing system for bitumen membrane systems. Applied in a single coat. Requires mineral chippings to be cast into the product before it has fully cured. Supplied with 50g of DANOFOR

DANOFORCE PRIMER+ LT

Low temperature primer for use with DANOFORCE PRIMER+ LT ACCELERATOR in low temperature applications. Requires 2-4% DANOFORCE CATALYST. Not suitable for use on DANOPOL membranes.

DANOFORCE STANDING SEAM PROFILE (PACK OF 10)

30mm high x 15mm wide raised standing seam profile effect.

DANOFORCE METAL PRIMER

Twin-pack epoxy metal primer for use on most metal surfaces (subject to bond test).

DANOFORCE LEAD EFFECT PROFILE (PACK OF 10)

50mm high x 40mm wide raised lead profile effect.

DANOFORCE FLEX HP

A highly versatile and flexible fast curing hybrid polymer liquid roofing system. Applied in 2 coats; minimum 2.0-2.5 litres per m2. Requires 2-4% DANOFORCE CATALYST. Colour: Anthracite (Approximate RAL 7015)

DANOFORCE PRIMER

Roller-applied primer for ALL WEATHER SEALANT and SEELEX LMC sealants and DANOBOND adhesive

DANOFORCE SEALER | ANTHRACITE (APPROX. RAL 7015)

Hard-wearing PMMA-based sealer coat applied onto quartz sand aggregate. Provides a tough, durable finish suitable for heavy foot traffic. Requires 2-4% DANOFORCE CATALYST.

DANOFORCE SEALER | LIGHT GREY (APPROX. RAL 7032)

Hard-wearing PMMA-based sealer coat applied onto quartz sand aggregate. Provides a tough, durable finish suitable for heavy foot traffic. Requires 2-4% DANOFORCE CATALYST.

Scroll to Top