GLASSFLEX REINFORCEMENT

450 g/m² fiberglass matting reinforcement layer for embedment within the first layer of DANOFORCE FLEX HP resin.

Product variations:
Waterproofing
BBA 20/5743 BBA 20/5743
Share
A reinforcing mat for inclusion in DANOFORCE FLEX HP waterproofing systems.

Instruction for Use


  • Substrates should be dry and clean from grease, dirt, debris or any other contaminants.
  • Loose-lay onto into catalysed 1st layer of danoforce flex hp waterproofing and ensure full embedment.
  • Side and head overlaps should be 50 mm and there should be no gaps between adjacent sheets.


  • Handling, storage and preservation

    • Rolls should be stored upright in a cool, dry area inside original packaging. Products are supplied on a cardboard tubing.

    Presentation

    • Length (cm): 21.05
    • Width (cm): 95
    • Weight (kg): 9
    • Product code: 322078
    GLASSFLEX REINFORCEMENT

    Technical Data

    Concept Value Standard
    Concept Value Standard
    Grammage (g/m²) 45 ± 5 -
    Longitudinal & transversal tensile strength (N/5cm) Urdimbre: ≥ 750-900 Trama: ≥ 450-600 -
    Resin content (%) 13 - 18 -
    450 ± 5% ISO 3374