Danosa > Danosa UK > Contractors > DANOPOL HS 1.8 COOL ROOFING

DANOPOL HS 1.8 COOL ROOFING

Single Ply PVC-p 1.8 mm membrane. Mechanically Fixed.

Product variations:
Waterproofing
BBA 14/5118 (1) BBA 14/5118 (1)
EPD S-P-00691 EPD S-P-00691
ETE 10/0054 ETE 10/0054
FM Approvals PR455736 RR242640 FM Approvals PR455736 RR242640
DANOPOL HS 1.8 COOL ROOFING is a synthetic PVC plasticized membrane, reinforced with polyester net carrier. Designed for flat roof waterproofing, U.V. resistant.

Notice

  • The information contained in this document and any other advice provided, are given in good faith, based on DANOSA's current knowledge and experience when products are properly stored, handled and applied, in normal situations and in accordance with the recommendations of DANOSA. The information applies only to the application (s) and the product (s) to which reference is expressly made. In case of changes in the parameters of the application, or in case of a different application, consult the DANOSA Technical Service before using the DANOSA products. The information contained herein does not exonerate the responsibility of the building agents to test the products for the application and intended use, as well as their correct application in accordance with current legal regulations. The product images used in our communications are indicative and may differ slightly in color and aesthetic appearance in relation to the final product.Orders are accepted in accordance with the terms of our current General Sales Conditions.DANOSA reserves the right to modify, without prior notice, the data reflected in this documentation.Website: www.danosa.com E-mail: info@danosa.com Telephone: +34 949 88 82 10

Presentation

  • Length (cm): 1300
  • Length measurement standard: EN 1848-2
  • Width (cm): 180
  • Width measurement standard: EN 1848-2
  • Thickness (mm): 1.8
  • Colour: White
  • Product code: 210057
DANOPOL HS 1.8 COOL ROOFING

Technical Data

Concept Value Standard
Mass per unit area (nominal) (kg/m²) 2.3 -
Longitudinal elongation at break (%) > 120 EN 12311-2 Método A
Transversal elongation at break (%) > 130 EN 12311-2 Método A
External fire behaviour Broof (t1) - Broof (t3) - Broof (t4) EN 13501-5
Longitudinal & transversal dimensional stability < 0.3 EN 1107-2
Water vapour permeability (µ) 47.000 ± 30% EN 1931
Flexibility at low temperature (ºC) < -30 EN 495-5
Reaction to fire E EN 13501-1
Resistance to static loading (kg) > 60 -
Resistance to static loading; method B (hard support) (kg) > 60 EN 12730 Método B
Resistance to root penetration Pasa EN 13948
Longitudinal & transversal tensile strength (N/5cm) > 1100 / 1000 EN 12311-2 Método A
Longitudinal resistance to tearing (nail shank) (N) > 300 EN 12310-2
Transversal resistance to tearing (nail shank) (N) > 300 EN 12310-2
Resistance to impact, A (mm) > 900 EN 12691
Overlaps resistance (Shear of overlaps) (N/50mm) > 1100 EN 12317-2
Overlaps resistance (Peeling of overlap) (N/50mm) > 250 EN 12316-2
Hazardous substances PND -

Addtitional Technical Data

Concept Value Standard
Visible defects Pasa EN 1850-2
Nominal minimum thickness 1.8 (-5%; +10%) EN 1849-2
Mass (kg/m²) 2.3 (-5%; +10%) EN 1849-2
Loss of elongation at break (UV 5000 h) < 10< 10 EN 1297, EN 12311-2EN 1297, EN 12311-2
Loss of plasticizers (mass change at 30 days) (%) < 4.5 EN ISO 177
Flatness (mm) < 10 EN 1848-2
Straightness (mm) < 50 EN 1848-2
Resistance to static punching (N) > 1200 UNE 104416 (b)

Environmental Information

Concept Value Standard
Post-consumer recycled content (%) NDP -
Pre-Consumer recycled content (%) NDP -
Solar reflectance index (SRI) 103 ASTM E1980-11
Manufactured in Fontanar - Guadalajara (España) -

Downloads