DANOPOL WALKWAY
Anti-slip PVC technical walkway
Product variations:
Flexible 1.5 mm thick PVC sheet reinforced with synthetic polyester fiber and featuring a non-slip surface, designed to be welded onto the main waterproofing membrane, creating technical walkways on roofs.
Scope
- Used as a technical access corridor to the roof, for refurbishment work or for checking installations in exposed sheet metal roofing systems.
Advantages & Benefits
- Compatible with all synthetic sheets in the DANOPOL® range.
- It has a non-slip finish.
- Allows technical access to the roof.
- Provides highly reliable welding and tapping.
- Protects waterproofing.
Instruction for Use
- Lay the aisle on the deck and allow it to lay flat, maintaining a distance of 15 cm between rolls.
- The rolls must be arranged in such a way that they allow for proper drainage through the slopes of the roof.
- Each piece shall be welded (longitudinally and transversally) by means of hot air and pressure to the waterproofing sheet, either by manual and/or mechanical means, achieving a weld of at least 4 cm thickness.
Indications and Important Recommendations
- In renovation projects on old waterproofing, it may be necessary to remove existing materials or to use suitable separating layers.
- The weldability and quality of the weld depend on atmospheric conditions (temperature, dampness), welding conditions (temperature, speed, pressure, pre-cleaning) and on the surface condition of the membrane (cleanliness, dampness). Therefore, the hot air machine must be adjusted to obtain a correct assembly.
- After the surface has cooled down, the welds shall be carefully checked by means of a punch. If any irregularity is detected in a hot air weld, it shall be reworked with the same procedure as described above.
- Appropriate safety measures must be taken as welding work can give off fumes which can be irritating.
Handling, storage and preservation
- The product must be stored in a dry place protected from rain, sun, heat and low temperatures.
- Easy to cut to adapt the dimensions to the work.
- No welding work should be carried out when the ambient temperature is lower than -5ºC for hot air welding.
- It shall be kept in its original packaging, in a horizontal position and all rolls parallel (never crossed), on a flat and smooth support.
Presentation
- Length (cm): 2000
- Length measurement standard: EN 1848-2
- Width (cm): 83
- Width measurement standard: UNE EN ISO 426
- Thickness (mm): 1.5
- Thickness (mm) ~ Standard: UNE 53.213-2
- Surface (m²): 16.6
- Colour: Anthracite grey
- Product code: 710269
Technical Data
| Concept | Value | Standard |
|---|---|---|
| Longitudinal elongation at break (%) | >15 | EN 12311-2 (Mét. A) |
| Transversal elongation at break (%) | >15 | EN 12311-2 (Mét. A) |
| Longitudinal & transversal tensile strength (N/5cm) | > 1000 | EN 12311-2 (Mét. A) |
| Longitudinal resistance to tearing (nail shank) (N) | >180 | EN 12310-2 |
| Transversal resistance to tearing (nail shank) (N) | >180 | EN 12310-2 |
| Overlaps resistance (Shear of overlaps) (N/50mm) | > 500 | EN 12317-2 |
| Overlaps resistance (Peeling of overlap) (N/50mm) | > 200 | EN 12316-2 |
| Adhesion between layers (N/50 mm) | > 100 | UNE EN ISO 527-1 |
Addtitional Technical Data
| Concept | Value | Standard |
|---|---|---|
| Flatness (mm) | 5 | UNE EN 13956 |
| Straightness (mm) | 20 | UNE EN 13956 |