Danosa > Danosa UK > Contractors > FLEECEBOND ADHESIVE (Canister)

FLEECEBOND ADHESIVE (Canister)

A Polyurethane Canister for the bonding of DANOPOL HSF membranes

Product variations:
Ancillaries
BBA 14/5118 (3) BBA 14/5118 (3)
Datasheet
Share
High-Grab Moisture-Curing Polyurethane (MCPU) Canister Adhesive for bonding fleece-backed PVC DANOPOL HSF membrane.

Instruction for Use

    Previous operations rr
  • Check that the surface you apply the adhesive is cohesive, dry and dust free. r- Cut the cloth material before applying the adhesive.r Application Adhesive Glue-Dan Acustic 1 r
  • The adhesive is applied to work bilaterally, providing a continuous layer in the two layers to be joined. r- The optimal performance is 0.125 kg / m² per layer of adhesive. r- Applied to roll, wait for 2-4 minutes before proceeding to the union. In spray application, the union can be done immediately. r- When the tack of the adhesive does not stain proceed to join the two layers pushing hard.

Notice

  • The information contained in this document and any other advice provided, are given in good faith, based on DANOSA's current knowledge and experience when products are properly stored, handled and applied, in normal situations and in accordance with the recommendations of DANOSA. The information applies only to the application (s) and the product (s) to which reference is expressly made. In case of changes in the parameters of the application, or in case of a different application, consult the DANOSA Technical Service before using the DANOSA products. The information contained herein does not exonerate the responsibility of the building agents to test the products for the application and intended use, as well as their correct application in accordance with current legal regulations. The product images used in our communications are indicative and may differ slightly in color and aesthetic appearance in relation to the final product.Orders are accepted in accordance with the terms of our current General Sales Conditions.DANOSA reserves the right to modify, without prior notice, the data reflected in this documentation.Website: www.danosa.com E-mail: info@danosa.com Telephone: +34 949 88 82 10

Presentation

  • Length (cm): 45
  • Width (cm): 35
  • Coverage (m²): 180
  • Appearance: Liquid
  • Colour: Pink
  • Product code: 320015
FLEECEBOND ADHESIVE (Canister)

Technical Data

Concept Value Standard
Temperature resistance (ºC) -30ºC / 150ºC -
Min application temperature (ºC) 5 -
Max application temperature (ºC) 30 -
Cure time at 20 ºC (min) 60 -

Standards and Certification

  • Exceeds standards for wind suction resistance. The adhesive has been rigorously and independently tested under EN 1991-1-4, where it achieved a strength of -5500Pa. Typical wind pressure is between -1000Pa and -2000Pa.

Downloads