SELF-DAN AL 100
Self-adhesive SBS elastomeric, easy peel foil faced membrane.
Product variations:
SELF-DAN AL 100 is a self-adhesive membrane manufactured with bituminous selected mastic modified with high performance SBS polymers, this will provide self-healing properties, easy application and great durability.r As a top layer it has a an aluminum foil of 60/1000 mm natural color. At the bottom side it has a releasable film.
Instruction for Use
Preparation of the substrate:
- The surface of the base substrate must be resistant, uniform, smooth, clean, dry and free of foreign bodies.
- A bituminous primer (Curidán, Impridán 100, Maxdán or Maxdán Caucho) must be applied beforehand.
- The rolls are preferably laid parallel to the line of maximum slope.
- The adhesion of the film to the substrate is achieved by removing the film from the underside and at the same time pressing with a blunt scraper or with gloves, from the inside outwards to avoid the formation of pockets. The overlaps must be made in the same way from roll to roll, and shall be 6 cm in the longitudinal direction and 8 cm in the transversal direction.
- For easier installation, it may sometimes be necessary to cut the rolls into smaller, more manageable dimensions.
Indications and Important Recommendations
- Do not use for waterproofing buried walls.
Maintenance Recommendations
- Please refer to DANOSA UK Technical Statement ‘Flat Roof Waterproofing – Cleaning and Maintenance Recommendations’
Notice
- The information contained in this document and any other advice provided, are given in good faith, based on DANOSA's current knowledge and experience when products are properly stored, handled and applied, in normal situations and in accordance with the recommendations of DANOSA. The information applies only to the application (s) and the product (s) to which reference is expressly made. In case of changes in the parameters of the application, or in case of a different application, consult the DANOSA Technical Service before using the DANOSA products. The information contained herein does not exonerate the responsibility of the building agents to test the products for the application and intended use, as well as their correct application in accordance with current legal regulations. The product images used in our communications are indicative and may differ slightly in color and aesthetic appearance in relation to the final product.Orders are accepted in accordance with the terms of our current General Sales Conditions.DANOSA reserves the right to modify, without prior notice, the data reflected in this documentation.Website: www.danosa.com E-mail: info@danosa.com Telephone: +34 949 88 82 10
Presentation
- Length (cm): 1000
- Width (cm): 100
- Thickness (mm): 1.2
- Colour: Natural
- Product code: 205017
Technical Data
| Concept | Value | Standard |
|---|---|---|
| Mass per unit area (nominal) (kg/m²) | 1.2 | - |
| Density (kg/m³) | 1000 | - |
| External fire behaviour | Froof | UNE-EN 1187;UNE-EN 13501-5 |
| Durability flexibility | NPD | - |
| Creep durability (ºC) | NPD | UN-EN 1110 |
| Elongation at break longitudinal (%) | NPD | UNE-EN 12311-1 |
| Elongation at transverse break (%) | PND | UNE-EN 12311-1 |
| Watertightness at 10 kPa (Type A) | Pasa | UNE-EN 1928 |
| Watertightness at 60 kPa (Type A) | Pasa | UNE-EN 1928 |
| Water vapour resistance factor (μ) | 20000 | EN 1931 |
| Low temperature flexibility (ºC) | < -15 | UNE-EN 1109 |
| Reaction to fire | E | UNE-EN 11925-2; UNE-EN 13501-1 |
| Resistance to static loading (kg) | NPD | UNE-EN 12730 |
| Resistance to root penetration | No Pasa | EN 13984 |
| Longitudinal tensile strength (N / 5cm) | 200 ± 100 | UNE-EN 12311-1 |
| Transverse tensile strength (N / 5cm) | 200 ± 100 | UNE-EN 12311-1 |
| Longitudinal resistance to tearing (nail shank) (N) | NPD | UNE-EN 12310-1 |
| Transversal resistance to tearing (nail shank) (N) | NPD | UNE-EN 12310-1 |
| Resistance to impact, A (mm) | NPD | UNE-EN 12691 |
| Joint Strength: Welding Shear | 200 ± 100 | UNE-EN 12317-1 |
Addtitional Technical Data
| Concept | Value | Standard |
|---|---|---|
| Adhesion of granules (%) | NPD | UNE-EN 12039 |
| Dimensional stability at elevated temperatures (longitudinal) (%) | NPD | UNE-EN 1107-1 |
| Dimensional stability at high temperatures (transversal) (%) | NPD | UNE-EN 1107-1 |
| Creep resistance at high temperatures (ºC) | >70 | UN-EN 1110 |
| UV, heat and water durability: Flexibility at low temperature (ºC) | NPD | - |
| UV, heat and water durability: Flow resistance at elevated temperature (ºC) | NPD | - |
Standards and Certification
- In accordance with the UNE-EN 13707 standard ‘Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics’.
- In accordance with the UNE-EN 13969 standard for ‘Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics’.
Environmental Information
| Concept | Value | Standard |
|---|---|---|
| Radon diffusion coefficient (m² / s) | < 1.0, Exp -13 | ISO/DTS 11665-13 |
| Volatile organic compounds (COV's) (µg/m³) | 50 (A+) | ISO 16000-6:2006 |
| Post-consumer recycled content (%) | 35 | - |
| Manufactured in | Fontanar - Guadalajara (España) | - |
Downloads
Product-related solutions
SYSTEM
DANOPOL HSF
SYSTEM
DANOPOL HS
SYSTEM
DURADAN
POLYDAN SYSTEM
POLYDAN
SYSTEM
DANOFORCE
SYSTEM
DANOFORCE OVERLAY
