DECOUPLING TAPE
Flexible tape used for insulation between mortar screeds and walls.
Product variations:
Peripheral band is composed of closed cell cross-linked polyethylene , 3 mm thick and 200 mm wide. It is used as auxiliary product when installing Impactodan´s solution for decks. It allows to disband perimeter walls form the mortar deck, avoiding transmission of vibrations trough walls.
Installation video
Instruction for Use
Preliminary operations
- Before starting the installation, it is advisable to consult the Technical Suitability Document nº 439 “IMPACTODAN impact noise damping system”.
- Once the IMPACTODAN is spread, check that it is perfectly placed on the substrate and as close to the vertical facing as possible, avoiding the creation of pockets.
- It is then folded 1/3 towards the side that does not have the self-adhesive.
- The smaller part of the fold will be glued on the Impactodan, the remaining 2/3 on the vertical surface.
- To stick the product, the edge of the roll, on the adhesive side, is placed on the joint of the IMPACTODAN with the vertical joint, making sure that it is high enough so that it does not touch the mortar.
- At the same time as the DESOLIDARIZADOR PERIMETRAL is unrolled, it is pressed down.
- Once the floor is finished, the excess should be trimmed off.
Presentation
- Length (cm): 2500
- Width (cm): 20
- Thickness (mm): 3
- Thickness (mm) ~ Standard: EN 1923
- Weight (kg): .75
- Surface (m²): 5
- Product code: 620044
Technical Data
| Concept | Value | Standard |
|---|---|---|
| Density (kg/m³) | 30 | EN 845 |
| Load for a deformation of the 25% (kPa) | >30 | EN 3386-1 |
| Thermal conductivity at 20ºC (W/mK) | 0.040 | ISO 8302 |
| Thermal conductivity declared (W/mK) | 0.040 | EN 12667 |
| Remainder deformation (24h compressed at 50%, 23ºC) (%) | < 35 | EN 1856 |
| Insulation thickness to be fixed (mm) | 3 | - |
| Modulus of elasticity (KPa) | > 2 | - |
| Reaction to fire | F | EN 13501-1 |
| Compressive strength at 25% (kPa) | > 30 | UNE EN ISO 3386-1 |
| Dynamic stiffness (MN/m³) | < 100 | EN 29052-1 |
| Thickness tolerance (%) | < 1 | EN 823 |
| Tolerance Length and Width (%) | < 1 | EN 822 |
| Hysteresis work (Nm) | > 1.9 | EN 3386-1 |
