Danosa > Danosa Global > Products > NEXALON ADHESIVE

NEXALON ADHESIVE

TPO membrane adhesive

Product variations:
Ancillaries
Datasheet
Share
Contact adhesive made from polychloroprene rubber, synthetic resins, and a suitable solvent blend (aromatic hydrocarbons, aliphatic hydrocarbons, and ketones).

Scope

  • Adhesive for use with TPO.
  • It is an adhesive ideal for bonding phenolic sheets, plywood, wood veneer, and particle board, as well as for decorative applications such as fabric, cork, rubber, metal, and other materials to each other.

Advantages & Benefits

  • High quality.
  • Excellent adhesion on various materials: phenolic sheets, cork, wood, metal, etc.

Instruction for Use

  • The surfaces to be bonded must be dry and free from grease, oils, dust, or any dirt.
  • Application can be done with a brush or spatula, ensuring a uniform layer.
  • If any of the surfaces to be bonded is porous, it is advisable to apply a second coat, allowing the first one to dry for the required time (airing time).
  • Once the airing time has elapsed, join the two surfaces. It is very important to keep in mind that solvent evaporation depends on humidity and ambient temperature, as well as on the materials to be bonded.

Handling, storage and preservation

  • The product must be stored in a dry place protected from rain, sun, heat and low temperatures.

Safety and hygiene

  • Consult the safety data sheet.
  • The adhesive is easily flammable, so sparks or any source of ignition must be avoided during storage and handling. It is recommended to use E.P.I, S protection during use.

Notice

  • The information contained in this document and any other advice provided, are given in good faith, based on DANOSA's current knowledge and experience when products are properly stored, handled and applied, in normal situations and in accordance with the recommendations of DANOSA. The information applies only to the application (s) and the product (s) to which reference is expressly made. In case of changes in the parameters of the application, or in case of a different application, consult the DANOSA Technical Service before using the DANOSA products. The information contained herein does not exonerate the responsibility of the building agents to test the products for the application and intended use, as well as their correct application in accordance with current legal regulations. The product images used in our communications are indicative and may differ slightly in color and aesthetic appearance in relation to the final product.Orders are accepted in accordance with the terms of our current General Sales Conditions.DANOSA reserves the right to modify, without prior notice, the data reflected in this documentation.Website: www.danosa.com E-mail: info@danosa.com Telephone: +34 949 88 82 10

Presentation

  • Volume (L): 24
  • Appearance: Yellowish liquid
  • Product code: 210802
NEXALON ADHESIVE

Technical Data

Concept Value Standard
Yield per coat (g/m²) 150 - 200 -
Min application temperature (ºC) +5 -
Max application temperature (ºC) +35 -
Airing time (min) 5 - 10 -
Viscosity (cps) 2500 ± 1000 UNE EN ISO 2555