DANOCOAT 250
Pure polyurea membrane with high mecanical and chemical strenght and high elasticity.
Product variations:
EPD S-P-03356
ETE 17/ 0401
Pure polyurea membrane with high mecanical and chemical strenght and high elasticity.
Installation video
Instruction for Use
- Before applying the product, check that the application surface is dry, clean and free of solid debris and irregularities.
- Protect yourself adequately for handling the components with appropriate gloves and mask. See safety data sheet.
- Mix the two components in the plastic container to a uniform mass.
- Apply to cracks and joints first. We recommend using 4×4 mm fibreglass reinforcement (PX160 mesh).
- Use a trowel/roller to apply the first coat and place in fresh PX160 Mesh reinforcement also in the corners.
- Apply the remaining coats crosswise to the previous coat for best result (see Drying Time).
Cleaning of Work Tools
- If the product is fresh, with water
- If the product is dry, scraping
Presentation
- Colour: White
- Product code: 750783
Technical Data
| Concept | Value | Standard |
|---|---|---|
| Adherencia al hormigón (con DANOPRIMER EP) (N/mm²) | 3.7 | ASTM D4541 |
| Elongation at break (%) | >400 | ASTM D412 |
| Tensile strength (N/mm²) | 15 | ASTM D412 |
| Initiated tear test (N/mm) | 165 | UNE-EN 12310-2 |
| Nail type tear test (N/mm) | 109 | UNE-EN 12310-1 |
| Taber abrasion Resistance | 21 mg | ASTM D4060 |
| Hardness (Shore A) | 90 | ASTM 2240 |
Addtitional Technical Data
Agenda cita con un técnico de Danosa
