REVESTIDAN SATE MINERAL
Mortar and render for plastering the SATE System
Colors:
White
25Kg - 350241
Plastering mortar based on white cement, polymeric resins, selected aggregates and chemical additives that give it an extraordinary performance for decorative finishes as a finishing coating for SATE systems.
Advantages & Benefits
- Manual or mechanical application
- Has the ability to re-form its shape.
- High mechanical performance.
- Extraordinary smoothness
- A strong whiteness with no yellowing.
- Waterproofed
- Controlled shrinkage
- Without off-hook.
- Thixotropic.
Instruction for Use
- The substrate shall be sound, clean, free of friable parts, fully hardened and have completed its time of dimensional variation.
- The substrate must have a surface of adequate porosity and roughness.
- Mix manually or mechanically until a homogeneous, creamy and lump-free mixture is obtained.
- Spread the mortar, leaving an average thickness of 2-4 mm, and smooth the applied material to regularise the thickness and smooth the surface.
Presentation
- Weight (kg): 25
- Yield (kg/m²): 5 kg/m² y 3 mm de espesor
- Performance in mm thickness (kg/m²): 1,8
- Appearance: Powder
- Colour: White
- Product code: 350241
Technical Data
| Concept | Value | Standard |
|---|---|---|
| Mass per unit area (nominal) (kg/m²) | 25 | - |
| Capillary Absorption (kg/m²h0.5) | W2 | - |
| Adhesion after thermal compatibility (N/mm²) | ≥ 0,8 | - |
| Adhesion (N/mm²) | 0.3 | - |
| Direct Tensile Adhesion (N/mm²) | ≥ 0,8 | - |
| Mixing water (%) | 21/23 | - |
| Classification according to UNE EN 998-1 | GP CSIV | - |
| Thermal conductivity declared (W/mK) | 0,47 | - |
| Bulk density (kg/L)v ~ Value | 1,60 ± 0,05 | - |
| Fresh mass density (kg/L) ~ Value | 1,80 ± 0,05 | - |
| Maximum thickness (mm) | 6 | - |
| Minimum thickness (mm) | 2 | - |
| Grain size range (mm) ~ value | 0/0,8 | - |
| Water vapour permeability (µ) | Clase I | - |
| Reaction to fire | A1 | - |
| Compacting resistence 28 days (N/mm²) | ≥ 7,5 | - |
| Compacting resistence 7 days (N/mm²) | ≥ 3 | - |
| Hazardous substances | Ver HS | - |
Agenda cita con un técnico de Danosa
