Danosa > Danosa Global > Products > DANOFELT PY 150

DANOFELT PY 150

150 g/m² Nonwoven Polyester Geotextile

Product variations:
Geotextiles
BBA 14/5118 (1) BBA 14/5118 (1)
S-P-01897 S-P-01897
DANOFET® PY is a non-woven geotextile formed by polyester threads, interwoven by needling, without the need or application of chemical binders. It has excellent mechanical and hydraulic behavior. Overall, nonwoven polyester geotextiles are an effective and versatile material for a wide range of civil engineering and construction applications, providing improved separation, filtration, and drainage applications.

Instruction for Use

Preparation of the substrate:
  • The surface of the base substrate must be resistant, uniform, compact and dry.
  • The singular points must also be prepared before starting the laying of the geotextile: chamfers or chamfers in meetings with vertical walls, reinforcements, joints and other singular points.
Laying the geotextile
  • Once the ground or substrate has been levelled, the roll of DANOFELT PY is laid. The second roll is then laid, leaving a minimum overlap of 20cm. Depending on the final application, it is recommended to fix the joint by stitching or stapling.
  • The materials should be poured without damaging the geotextile. In the same way, the spreading of the different layers should be carried out in such a way that the spreading and compacting equipment does not circulate at any time on the surface of the geotextile, and always in such a way that the direction of advance of the spreading machinery of the upper layer does not affect the overlapping of the geotextile layers.

Presentation

  • Length (cm): 8000
  • Width (cm): 220
  • Thickness (mm): 1.9
  • Surface (m²): 176
  • Product code: 710030
DANOFELT PY 150

Technical Data

Concept Value Standard
In-plane water flow capacity (m²/s) 20 kPa 2.7 Exp-7, -0.2 Exp-7 UNE EN ISO 12958
Protection effectiveness (kN/m²) 9.0 Exp3, -0.3 Exp3 UNE-EN 13719
Elongation at break longitudinal (%) 105 ±40 UNE EN ISO 10319
Elongation at transverse break (%) 105 ±40 UNE EN ISO 10319
Thickness a 2kPa (mm) 1.90, ±0.20 -
Grammage (g/m²) 150 (+10%;-15%) UNE EN ISO 9864
Opening size (µm) 90, ±20 UNE EN ISO 12956
Dynamic drilling (cone drop) (mm) 35, +5 UNE EN ISO 13433
Water permeability (m/s) 0.04468, -0.005 UNE EN ISO 11058
Static punching (CBR) (kN) 0.4, -0.2 UNE EN ISO 12236
Longitudinal tensile strength (kN/m) 1.3, -0.4 UNE EN ISO 10319
Tranversal tensile strength (kN/m) 1.3, -0.4 UNE EN ISO 10319
Hazardous substances PND -

Addtitional Technical Data

Thickness at 200kPa (mm) 0.5, ±0.20 - Thickness at 20kPa (mm) 1,0, ±0,20 UNE EN ISO 9863-1 Thickness at 200kPa (mm) 0.5, ±0.20 - Thickness at 20kPa (mm) 1,0, ±0,20 UNE EN ISO 9863-1

Downloads