CONFORDAN BT
Cross-linked polyethylene foam membrane for acoustic insulation of laminated or timber floors.
Product variations:
Flexible cross-linked polyethylene membrane. It is used as an acoustic insulation and protection against humidity under laminated floors.
Installation video
Instruction for Use
Preliminary operations
The installations must be finished before laying the CONFORDAN BT sheet.
Ground unevenness of more than 3 mm in 1 m must be levelled beforehand with levelling paste.Fixing equipment
Aluminium ADHESIVE TAPE should be used to fasten the sheet to each other and to any point on site such as slabs, pillars, walls or any other structural element that acts as an electrical earthing system.Laying of CONFORDAN BT
- Before starting the works, the materials necessary for the execution of the work must be gathered, which are:
The installations must be finished before laying the CONFORDAN BT sheet.
Ground unevenness of more than 3 mm in 1 m must be levelled beforehand with levelling paste.Fixing equipment
Aluminium ADHESIVE TAPE should be used to fasten the sheet to each other and to any point on site such as slabs, pillars, walls or any other structural element that acts as an electrical earthing system.Laying of CONFORDAN BT
- Unroll the CONFORDAN BT in the longitudinal direction of the boards, cutting the necessary size with a cutter.
- It is advisable to overlap and seal with aluminium adhesive tape to give continuity to the insulation and prevent damp from penetrating.
- Install the floating floor according to the manufacturer’s instructions.
Presentation
- Length (cm): 2500
- Width (cm): 106
- Thickness (mm): 3
- Thickness (mm) ~ Standard: EN 1923
- Surface (m²): 26.5
- Colour: Yellow
- Product code: 620051
Technical Data
| Concept | Value | Standard |
|---|---|---|
| Density (kg/m³) | 40 ± 2 | EN 845 |
| Water absorption under hydrostatic pressure (%) | 1.66 | EN-12087 |
| Thermal conductivity declared (W/mK) | 0.050 | EN 12667 |
| Compression strength (kPa) | 40 | UNE EN ISO 3386-1 |
| Remainder deformation (24h compressed at 50%, 23ºC) (%) | < 10 | EN 1856 |
| Insulation thickness to be fixed (mm) | 3 | - |
| Reaction to fire | F | EN 13501-1 |
| Compressive strength at 25% (kPa) | > 30 | UNE EN ISO 3386-1 |
| Traction resistance (kPa) | > 200 | UNE-EN ISO 1798 |
| Dynamic stiffness (MN/m³) | < 60 | EN 29052-1 |
| Thickness tolerance (%) | < 10 | EN 823 |
| Tolerance Length and Width (%) | < 10 | EN 822 |
| Hysteresis work (Nm) | > 2.1 | EN 3386-1 |
Addtitional Technical Data
Environmental Information
| Concept | Value | Standard |
|---|---|---|
| Volatile organic compounds (COV's) (µg/m³) | 30 | ISO 16000-6:2006 |
| Content of recycled raw material (%) | 5 | - |
| Pre-Consumer recycled content (%) | 100 | - |
| Manufactured in | Fontanar - Guadalajara (España) | - |
Agenda cita con un técnico de Danosa
