MATIMPACT 5
Smooth rubber fibre sheet underlayment.
Product variations:
MATIMPACT 5 is a smooth, 5mm-thick sheet made from recyled rubber granules, designed to improve impact noise insulation in floating floor. Its slim profile allows it to be incorporated into installations with height restrictions, laid directly beneath the floor finish, providing a continuous decoupling layer without significantly increasing the overall thickness of the system.
Scope
- Impact sound insulation beneath the final floor covering.
- Residential buildings, hotels, offices and other collective-use buildings.
- Installation beneath floor finishes such as ceramic tiles, parquet, laminate flooring and other compatible floor coverings.
- Suitable for both renovation and new-build projects where improved acoustic insulation is required with minimal thickness.
Advantages & Benefits
- Reduced thickness for solutions where limited height is available.
- Suitable for ceramic flooring or bonded/floating wood flooring.
- Premium solution for high.performance floating floor systems with mínimum thickness.
Instruction for Use
Indications and Important Recommendations
- Do not puncture the sheet or allow mortar residues to create acoustic bridges.
- Seal the joints between to prevent mortar from seeping trough them.
- The values indicated correspond to the results available at the current stage of product development and may be updated as the industrialisation and validation process progresses.
Handling, storage and preservation
- Store in a dry place, protected from the weather, heat sources and direct sunlight.
- Keep the product in its original packaging until use.
- Avoid deformation, impacts or supports that could alter the smooth geometry.
Notice
- The information contained in this document and any other advice provided, are given in good faith, based on DANOSA's current knowledge and experience when products are properly stored, handled and applied, in normal situations and in accordance with the recommendations of DANOSA. The information applies only to the application (s) and the product (s) to which reference is expressly made. In case of changes in the parameters of the application, or in case of a different application, consult the DANOSA Technical Service before using the DANOSA products. The information contained herein does not exonerate the responsibility of the building agents to test the products for the application and intended use, as well as their correct application in accordance with current legal regulations. The product images used in our communications are indicative and may differ slightly in color and aesthetic appearance in relation to the final product.Orders are accepted in accordance with the terms of our current General Sales Conditions.DANOSA reserves the right to modify, without prior notice, the data reflected in this documentation.Website: www.danosa.com E-mail: info@danosa.com Telephone: +34 949 88 82 10
Presentation
- Length (cm): 1200
- Width (cm): 120
- Thickness (mm): 5
- Product code: 610115
Technical Data
| Concept | Value | Standard |
|---|---|---|
| Mass per unit area (nominal) (kg/m²) | ≥ 4.15 | EN 13501-1 |
| Densidad (kg/m³) | ≥ 750 | EN 13501-1 |
| Thermal conductivity declared (W/mK) | ≥ 0,10 | DIN EN 12667 |
| Compression strength (kPa) | ≥ 100 | EN 826 |
| Creep (% H/dec) | 0.25 (0.02 mPa) | ISO 8013 |
| Reaction to fire | E | EN 13501-1 |
| Tensile strength (kPa) | ≥ 400 | ISO 37 |
| Thermal Resistance (m²K/W) | ≥ 0,05 | DIN EN 12667 |
| Dynamic stiffness (MN/m³) | ≥ 50 | EN 29052-1 |
| Break Elongation (%) | ≥ 40 | ISO 37 |
| Work temperature (ºC) | -30 / 80 | EN 13501-1 |
Addtitional Technical Data
Acoustic Performance:| Concept | Value | Standard |
|---|---|---|
| ΔLw result (dB) | 21-23 | EN ISO 717-2 |
| Reference configuration | 140 mm reinforced concrete slab + ARGOCOLA ELITE 500 + MATIMPACT 5 + ARGOCOLA ELITE 500 and ceramic flooring | System SUF6.1 · System SUF 6.2 |
Agenda cita con un técnico de Danosa
