DANOTHERM MECHANICAL FIXINGS
SGR expansion plug for fixing thermal insulation. Certified ETAG 014
Product variations:
Polypropylene expansion plug with a diameter of 8 mm for fixing insulating panels in the DANOTHERM® SATE external thermal insulation system. With approval ETA06-0242 according to ETAG014 for use category B (solid brick) and C (hollow brick).
Installation video
Instruction for Use
- 24-48 hours after fixing the insulation boards to the facade with the adhesive ARGOTEC® Fixtherm Élite or ARGOTEC® Fixtherm Élite Netzero, drill a hole in the substrate through the insulation board using a drill. The drill bit must have a diameter of 8 mm and the depth of the hole in the substrate must be at least 35 mm, taking into account the adhesive thickness and the depth of penetration into the substrate.
- Insert the anchor plug into the hole until it rests on the insulation board.
- With the help of a mallet, tap the anchor so that it is flush with the insulation.
- Lay 6 pcs/m² in general, for which it is sufficient to place one anchor plug at each junction of two or three insulation boards.
Presentation
- Product code: 715013
Technical Data
| Concept | Value | Standard |
|---|
Agenda cita con un técnico de Danosa
